南海海盆区莫霍面分布规律及其对深部钻探的意义     

秦绪文  张宝金  赵斌  路允乾  陈玺  王利杰  许振强  张如伟  耿明会  杨振  李建平  吕文超  尉建功 《地质学报》2022,96(8):2635-2646

钻遇莫霍面是人类一直以来的梦想。深海海底是地球上离莫霍面最近的地方，目前有研究推测南海是世界上莫霍面深度最浅的海域之一，但缺乏足够的直接证据。深反射地震探测可以直接揭示岩石圈的构造形态，是莫霍面探测的重要手段。本文基于长达15000 km的深反射多道地震剖面的解释、处理、制图和分析，结合前人的研究，形成了南海海盆区莫霍面反射特征和空间分布的初步认识。① 南海东部次海盆南部早期经历了较快速扩张，岩浆供应充足，受扩张停止后岩浆活动影响较小，基底平坦，地质构造相对简单，同时洋壳地震速度结构不存在异常，且有较强的广角莫霍面反射波和可识别的地幔顶部折射波，具备莫霍面钻探的基本条件。② 南海海盆不同区域的莫霍面反射强度存在较大差异。其中东部次海盆莫霍面反射最为强烈且清晰，西北次海盆次之，西南次海盆仅有零星出现的清晰莫霍面反射且可信度不高。③ 识别南海海盆区莫霍面地震反射长度超过3500 km，首次形成了海盆区深度域莫霍面地震反射空间分布图。与重力反演的莫霍面深度相比，利用深反射多道地震计算的莫霍面深度细节更为丰富，并且可以在垂向上清晰刻画莫霍面的结构。整体上，南海海盆区莫霍面地震反射强烈和可信度高的区域中，深度较浅的区域之一是东部次海盆南部，最浅处仅约9. 5 km，其中水深4. 01 km，洋壳厚度仅5. 54 km。综合判断，东部次海盆南部是南海重要的莫霍面钻探备选区，这对南海莫霍面钻探选址具有重要意义。  相似文献   

基于土地适宜性评价与元胞自动机模型的城市开发边界划定方法     

李焰  梁美丽 《北京测绘》2021,35(2):222-229

城市开发边界的划定可以在一定程度上引导城市空间的良性扩张。为了研究边界划定的方法,以我国某港口城市作为研究区域,在空间增长模拟的方向进行探索。研究中借助土地适宜性评价和元胞自动机边界工具,构建既符合生态资源环境要求又符合城市发展需要的边界划定,同时,为了实现城市用地健康和动态管控举措,提出了建立健全土地用地管理机制的要求。  相似文献   

利用主成分分析改善土地利用变化的遥感监测精度——以珠江三角洲城市用地扩张为例   总被引：41，自引：7，他引：34  

黎夏  叶嘉安 《遥感学报》1997,1(4):282-289

近年来,珠江三角洲由于经济的快速发展,城市用地急剧增加,利用多时相的遥感图,可以定量地监测这种城市化的现象。但理,由一般的遥感动态监测方法所得的结果往往夸大变化的程度,以及获得一些不合理的结论．该文提出主成分分析的方法来改善遥感动态监测的精度。将该方法应用应用于珠江三角洲发展最快的东莞市,获得了较满意的结果。  相似文献   

南极长城站地区现代环境地球化学特征          下载免费PDF全文

赵俊琳 《极地研究》1990,2(2):1-12

本文通过环境背景值、风化壳地球化学、对流层(大气气溶胶)地球化学和人为地球化学异常,初步探讨了南极长城站地区的现代环境地球化学特征。分析表明:环境要素固有的地球化学性质、区域环境条件和自然环境演变之间具有深刻的内在联系。  相似文献   

云南大地热流及地热地质问题   总被引：46，自引：5，他引：41       下载免费PDF全文

汪缉安  徐青 《地震地质》1990,12(4):367-377

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点  相似文献   

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures   总被引：7，自引：1，他引：7  

Changrong He  Wenming Yao  Zeli Wang  Yongsheng Zhou   《Tectonophysics》2006,427(1-4):217

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.  相似文献   

Seismic lamination and anisotropy of the Lower Continental Crust   总被引：2，自引：3，他引：2  

Rolf Meissner  Wolfgang Rabbel  Hartmut Kern 《Tectonophysics》2006,416(1-4):81

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.  相似文献   

我国入境旅游和经济增长关系分析   总被引：37，自引：0，他引：37  

庞丽  王铮  刘清春 《地域研究与开发》2006,25(3):51-55,128

文章分析了入境旅游发展的区域差异，并用Granger因果检验来考察入境旅游和各区域经济增长之间是否存在相应的因果关系，Granger因果检验的结果表明在东部地区，入境旅游和经济增长存在单向因果关系。东部地区的入境旅游对区域的经济增长产生显著影响。但是全国和中西部地区的入境旅游与经济增长之间不存在显著的因果关系。类似地，东部地区入境旅游增长是其第三产业增长的Granger原因。但是全国和中西部地区的入境旅游和相应区域第三产业的增长并不存在显著的因果关系。在区域层面上。只有少数区域支持入境旅游是区域GDP增长的Granger原因，它们是东部地区的北京、广东、上海、天津、福建、江苏、浙江、海南和广西；中部地区的黑龙江和湖南以及西部地区的云南和陕西。在这些省区市。入境旅游对区域经济增长产生显著的影响。但总体而言，入境旅游在我国还没有足够的发展。  相似文献   

Variscan to eo-Alpine events recorded in European lower-crust zircons sampled from the French Massif Central and Corsica, France     

Philippe Rossi  Alain Cocherie  C. Mark Fanning  tienne Deloule 《Lithos》2006,87(3-4):235-260

Ion-microprobe U–Pb zircon dating of lower-crust metasedimentary granulite are reported on samples from two localities in Europe in order to determine (a) how this environment recorded the Variscan and eo-Alpine events, and (b) whether the transition between the two orogenic cycles was continuous or separated by a gap. The samples come from enclaves hosted by Miocene volcanoes at Bournac in the French Massif Central, and from the granulitic metasedimentary basement of the Alpine Santa Lucia nappe in Corsica, on the South European paleomargin of the Ligurian branch of the Tethys Sea. The zircon ages from Bournac range between 630 and 430 Ma and between 380 and 150 Ma with a major frequency peak at 285 Ma; the zircons older than 430 Ma are interpreted as detrital, whereas those younger than 380 Ma are considered to have formed by metamorphic processes after burial in the lower crust. Zircon ages from Santa Lucia range from to 356 to 157 Ma, with exception of one inherited Archean grain, and are interpreted like the younger Bournac zircons as having been formed by metamorphic processes.

In a granulite metamorphic environment, as opposed to an anatectic environment, new zircon growth can occur in the solid state. Once Zr has been incorporated into zircon, however, it is difficult to remobilize without dissolution; thus Zr available for new zircon growth must result from the breakdown of Zr-bearing minerals during prograde and/or retrograde events. In this light, the U–Pb zircon-age probability curves are interpreted as markers for major tectonometamorphic events, as suggested by the close correspondence between peaks in the curve and geological events recorded in the upper-crust, such as magma emplacement and basin subsidence.

Evidence of a tectonometamorphic gap between the Variscan and Alpine orogeneses is provided by the Santa Lucia zircon-age probability curve, which reveals a probable interlude during the Variscan–Alpine transition between 240 and 210 Ma. Here, the peak at 240 Ma is interpreted as the very beginning of crustal extension and the low at 210 Ma as a period of quiescence prior to the formation of an active margin and oceanization.  相似文献   

Petrogenesis of Cretaceous adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province (eastern China): Implications for geodynamics and Cu–Au mineralization     

Qiang Wang  Derek A. Wyman  Ji-Feng Xu  Zhen-Hua Zhao  Ping Jian  Xiao-Lin Xiong  Zhi-Wei Bao  Chao-Feng Li  Zheng-Hua Bai 《Lithos》2006,89(3-4):424-446

Both adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province, eastern China are associated with Cretaceous Cu–Au mineralization. The Shaxi quartz diorite porphyrites exhibit adakite-like geochemical features, such as light rare earth element (LREE) enrichment, heavy REE (HREE) depletion, high Al₂O₃, MgO, Sr, Sr / Y and La / Yb values, and low Y and Yb contents. They have low ε_Nd(t) values (− 3.46 to − 6.28) and high (⁸⁷Sr / ⁸⁶Sr)_i ratios (0.7051–0.7057). Sensitive High-Resolution Ion Microprobe (SHRIMP) zircon analyses indicate a crystallization age of 136 ± 3 Ma for the adakitic rocks. Most volcanic rocks and the majority of monzonites and syenites in the Luzong area are K-rich (or shoshonitic) and were also produced during the Cretaceous (140–125 Ma). They are enriched in LREE and large-ion lithophile elements, and depleted in Ti, and Nb and Ba and exhibit relatively lower ε_Nd(t) values ranging from − 4.65 to − 7.03 and relatively higher (⁸⁷Sr / ⁸⁶Sr)_i ratios varying between 0.7057 and 0.7062. The shoshonitic and adakitic rocks in the Luzong area have similar Pb isotopic compositions (²⁰⁶Pb / ²⁰⁴Pb = 17.90–18.83, ²⁰⁷Pb / ²⁰⁴Pb = 15.45–15.62 and ²⁰⁸Pb / ²⁰⁴Pb = 38.07–38.80). Geological data from the Luzong area suggest that the Cretaceous igneous rocks are distributed along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China and were likely formed in an extensional setting within the Yangtze Block. The Shaxi adakitic rocks were probably derived by the partial melting of delaminated lower crust at pressures equivalent to crustal thickness of > 50 km (i.e., 1.5 GPa), possibly leaving rutile-bearing eclogitic residue. The shoshonitic magmas, in contrast, originated mainly from an enriched mantle metasomatized by subducted oceanic sediments. They underwent early high-pressure (> 1.5 GPa) fractional crystallization at the boundary between thickened (> 50 km) lower crust and lithospheric mantle and late low-pressure (< 1.5 GPa) fractional crystallization in the shallow (< 50 km) crust. The adakitic and shoshonitic rocks appear to be linked to an intra-continental extensional setting where partial melting of enriched mantle and delaminated lower crust was probably controlled by lithospheric thinning and upwelling of hot asthenosphere along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China. Both the shoshonitic and adakitic magmas were fertile with respect to Cu–Au mineralization.  相似文献